RollerCoaster Tycoon 3 Tutorial

This article or section is under construction. You can help by editing it! Relevant discussion may be available on this article's discussion page.

Career mode Sandbox Mode Custom scenario

The Tutorial mode is a mode in RollerCoaster Tycoon 3 that shows the player various gameplay techniques, mainly how to build different attractions. It also focuses on controls, strategy and the introduction to new features.

Levels

Seven different tutorials come with RCT3, each taking the form of a park, and a window telling the player what to do. If there is a button to click, it will be highlighted. All other clickable feautures are darkened and inactive.

Another eight tutorials were added in Soaked!, and six came with Wild!.

The player is not able to return to a previous step, but to quit the tutorial any time.

RCT3

Camera controls

This tutorial will teach you how to control the game's 3D camera.

The only camera setting feautured in the tutorial is "Normal". At first, you are shown different ways to move the camera, then how to alternate the viewing angle (temporarily) and how to zoom in/out. Finally, the CoasterCam is explained. The tutorial tells you how to point the camera to a desired direction and how to set the distance to the camera. Also, it teaches how to navigate between all camera positions on the same train and between the coaster's different trains.

Placing rides

This tutorial will take you through the process of placing and riding your first RollerCoaster.

First, you are taught how to build a roller coaster. The one chosen by the tutorial is the pre-built design "Little Beast", a Wooden Roller Coaster. Then, the turorial shows you how to rotate, place and test it, as well as how to build a queue line to the entrance and a regular path leading away from the exit. Because rides need maintanace, the hiring and management of a mechanic is explained before the roller coaster is opened.

Following the tracked ride, a non-tracked ride (Floundering Ferry) is to be built, because of the arbitrarily placeable entrance and exit. On this occasion, the CoasterCam is revealed to also work on non-tracked rides. Finally, you are shown how to build and open a shop (Hot Dog Stall).

Custom coasters

This tutorial will teach you how to design your own RollerCoaster.

To show how to design a custom roller coaster, the Wooden Roller Coaster is used again. After building a station, a lift hill and a drop, the player is instructed how to place a banked curve and a photo section. Then, the player is shown the brakes and special elements (of which a looping is built). Next, the auto-complete tool is demonstrated, before an entrance and exit are built.

After telling the player how to remove built track pieces, the tutorial moves on to the roller coaster's coloring and testing. In addition to this, the testing statistics panel is explained. After that, the player learns how to change the cars and gets to know all the other panels of the ride's window. Next up is the ride's renaming and demolishing and also the way to save track designs. The last steps of this tutorial are the placement and adjustment of ride events (here the Oil Derrick) and the loading of a saved track.

Terrain, paths and scenery

This tutorial will teach you how to raise, lower and color terrain, and how to place paths and scenery items.

In the beginning the tutorial teaches you how to make mountains and canyons using the brush tool and also how to flatten land with it. The tutorial proceeds to the drag mode and to the coloring of landscapes (grass coloring over desert ground). Next up are paths with the building modes and sloping. The last steps are the building of a brick house with a front door, a wall with windows, corner walls and block roofs.

Water rides

This tutorial will teach you how to build water rides and stacked rides.

Completing the tutorial Custom Coasters is recommended before beginning this tutorial. It starts with building a Jet Skis ride (only station pieces). The player now moves on to stacked rides (base and custom-height tower track) and builds a RotoDrop. After testing it the tutorial is over.

Fireworks

This tutorial will teach you how to create your own fireworks display.

Starting with how to build and start a pre-made fireworks display, the tutorial moves on to player-created displays. The player is introduced to the 'MixMaster' called editor and learns how to build bases, choose the type of firework and integrate it into a sequence.

Park Management

This tutorial will teach you how to run a successful park.

Because it is the most important thing while playing in carrer mode, you are shown the objectives window at first. Then, the park management menu and all its buttons, which lead to windows as e.g. the research window, are explained subsequently.

Soaked!

Basic Pools

This tutorial will teach you how to create swimming pools.

The player is shown at first how to build and modify a pool layout (i.e. how to add pool and tile blocks). Changing the type of corner and adding paths to a pool is also part of this tutorial.

Advanced Pools

This tutorial will teach you how let people into your swimming pools, and how to create spiral staircases.

This tutorial now makes the step from theory to practice. Beginning with a simple pool complex and a path with visitors around, the player is taught how to add changing rooms and how they are related to the complex cleanliness. Next up are building pools on higher levels and connecting them via spiral staircases. In the end, the player is shown how to create waves and whirlpools with the mouse.

Pool Facilities

This tutorial will teach you how to add features to your pools such as spa pools, diving boards and water slides.

First, the player is taught how to place the smaller extras and which places are allowed for them. The second and last step is about building Pool Slides and Rides (here the Body Slide with a flume end) and testing it.

Laser Shows

This tutorial will teach you how to create laser and water shows.

Advanced Laser Designer

This tutorial will teach you how to create your own custom laser effects.

Image Lasers

This tutorial will teach you how to create lasers that draw images onto a surface.

Whale Shows

This tutorial will teach you how to build whale shows and how to tell the whale which tricks to do.

Soaked Extras

This tutorial will show you a number of other new features in RollerCoaster Tycoon 3: Soaked!, including tunnels and waterfalls.

Wild!

Animal Enclosures

This tutorial will teach you how to create an enclosure and add animals to it.

Animal Care

This tutorial will teach you how to look after your animals.

Wild Coasters

This tutorial will introduce you to some of the new coaster types in RollerCoaster Tycoon® 3: Wild!

Lion Show

This tutorial will teach you how to build and control the lion & tiger shows.

Safari Transport

This tutorial will teach you how to send special safari transport rides through animal enclosures.

Wild Extras

This tutorial will show you a number of other new features in RollerCoaster Tycoon 3: Wild!

See Also

• RollerCoaster Tycoon 1 Tutorial
• RollerCoaster Tycoon 2 Tutorial