H2Oslide Bowl
The H2Oslide Bowl is introduced in RCT3 (Soaked), and is designed as a swimming pool's ride. Peeps will lay on mats and will go through the track filled with water. At the end, the track will stop and Peeps will land onto the pools.
| H2Oslide Bowl | |
|---|---|
| Type | Pool Slides and Rides |
| Description | A flume with specially constructed funnel shaped sections. |
| Cost | $2,250 upwards |
| Size | Large (actual size depends on construction) |
| Appearances | RCT3 (Soaked) |
Construction
Similar in terms of functions to the Dingy Slide, this ride is exclusively built as a ride for swimming pools.
Special Track Elements
Bowl
- Bowl Left
- Bowl Right
This track piece is the ending piece for the ride. Peeps will spin around the bowl before splashing into the pools through the large hole at the middle.
Flume End
- Flume End
This track piece ends the ride. Peeps will fly out of the track and land into the pools.
Funnel
- Funnel Left
- Funnel Right
This track piece ends the ride. Peeps will move from left to right and exit the hole, then plunge into pools.
Others
- S-bend
- Banked curves
- Banked S-bend
- Slide End to Lift Hill Left
- Slide End to Lift Hill Right
- Large Helix
- Small Helix
Constraints
- Banked Curves - 30° banking
- Maximum Track Slope - 90°
- Maximum Lift Hill Slope - 60°
- Maximum Height - 134.83 Feet (41.10 m)
Vehicles
- Standard mats
Other Information
- Ensure that the ride ends in the swimming pools, or else Peeps will land other place and the ride will be forced to close.
- This ride is free for guests. You cannot earn any profit from it.
Approximate Cost
$2,250 upwards