Stand-up Roller Coaster
Stand-Up Steel Roller Coaster | |
---|---|
Type | Roller Coaster |
Description | A roller coaster similar to the Steel Roller Coaster, which has the riders standing up rather than sitting down. |
Cost | $3,750 upwards |
Size | Medium-Large (actual size depends on construction) |
Appearances | RCT, RCT2, RCT3 |
Construction
Track has a tubular steel spine, connected to the inside edges of tubular steel running rails. Supports are large tubular steel posts. Trains are held on the track by wheels above, below and outside the running rails.
Special Track Elements
Banked Curves, Vertical Loop, Half Loop, Corkscrew, On-Ride Photo
Constraints
- Maximum Track Slope - 60°
- Maximum Lift Hill Slope - 25°
- Maximum Height - 131 Feet
Vehicles
Stand-Up Roller Coaster Cars
Other Information
Gives a more intense ride than a sit-down roller coaster, so the track requires careful design to avoid high G forces, especially lateral G's.
Approximate Cost
$3,750 upwards
Appears in
- RollerCoaster Tycoon
- RollerCoaster Tycoon 2 as three seperate rides for each type of vehicle.
- RollerCoaster Tycoon 3