Building A Ride: Difference between revisions

Here's a brief rundown of the necessary steps involved to build a [[ride]].

2. Using the tabs, choose a type of [[ride]].

3. Select a [ride]] by clicking on it's picture.

4. Determine the location and orientation of the [[ride]], then click the spot on the landscape where you want to build it. For some rides, building is a single click process, for others, it may take some time.

5. Place the entrance and exit for the [[ride]].

6. Create a queuing line to attach to the entrance, and connect path to the exit. paths can connect directly to entrances without queue lines, but the maximum queue length would be limited to 1 guest. It is also possible to leave the exit without a path, [[Guests and Staff|guests]] will wander until they find a [[path]] close by. Having an elevated exit directly over a [[path]] will cause the guests to fall onto that path, therefore, no path is actually needed to connect.

[[Mechanics]] find [[rides]] by the exit, so when a [[ride]] breaks down, exit paths are required.

7. Test the [[ride]], set an admission price, give it a name and determine its operating characteristics. In [[RCT1]], most guests will not ride a [[Roller Coaster|roller coaster]] unless it has been properly tested and given a rating.

8. Open the [[ride{].