Hypercoaster
Construction
Track and supports are made out of stee;. The trains seat 6 people per car and have lap bar restraints. The train is held to the track by wheels above,below and inside the rails.
Special Track Elements
- Banked Curves
- Banked Helix
- Block Brakes
- On Ride Photo Section
- Figure of Eight Loop(RCT3 only)
- Small Over-banked Curve(RCT3 only)
- Large Over-banked Curve(RCT3 only)
Constraints
- Maximum track slope - 60°
- Maximum height above ground - 220feet(RCT2)
Vehicles
- ypercoaster Trains
Other Information
- The difference between the Hypercoaster and the Hyper-Twister Roller Coaster is that the Hyper-Twister can be banked on a slope and that the track on the Hypercoaster looks like Arrow track and the Hyper-Twister track is B&M track.
- In the origional RCT, the Hypercoaster was built by selecting the Steel Roller Coaster,not using inversions in your track design and selecting Hypercoaster Trains.
In Real Life
This ride is based on the 'Hyper Coaster' by Arrow Dynamics. The first was built in 1989 at Cedar Point and now there are five Arrow Hyper Coasters built around the world.RCDB Entry
Gallery
-
A large Hypercoaster in RCT2
-
