Building A Ride: Difference between revisions
Content added Content deleted
Line 22: | Line 22: | ||
8. Open the [[ride{]. |
8. Open the [[ride{]. |
||
==Building a Roller Coaster== |
==Building a [[Roller Coaster]]== |
||
===Coaster Checklist=== |
===Coaster Checklist=== |
||
Line 28: | Line 28: | ||
*At least one piece of connected Station Platform track (one station platform can fit the entrance on one side, and the exit on the other). |
*At least one piece of connected Station Platform track (one station platform can fit the entrance on one side, and the exit on the other). |
||
*Ride track that begins at the station platform's start and reconnects to the station platform's rear in a continuous loop (not neccesary if the operating mode is reverse inclined shuttle launch or powered launch, but make sure the train eventually reaches the station platform again in reverse). |
*Ride track that begins at the station platform's start and reconnects to the station platform's rear in a continuous loop (not neccesary if the operating mode is [[reverse inclined shuttle launch]] or powered launch, but make sure the train eventually reaches the station platform again in reverse). |
||
*Medium incline track with pull chains (not needed with powered launch mode). In reverse inclined shuttle launches, put the pull chains behind the station platform. Steep chain lifts are possible. |
*Medium incline track with pull chains (not needed with powered launch mode). In reverse inclined shuttle launches, put the pull chains behind the station platform. Steep chain lifts are possible. |
||
*Initial slope downwards after the pull chain ends, to build speed and allows the cars to finish the circuit. Make sure the highest non-lifthill peak is lower than the lift hill peak. |
*Initial slope downwards after the pull chain ends, to build speed and allows the cars to finish the circuit. Make sure the highest non-lifthill peak is lower than the lift hill peak. |