Paths: Difference between revisions

345 bytes added ,  3 years ago
added tips by reddit user Javret
(Remove false statement)
(added tips by reddit user Javret)
 
(3 intermediate revisions by 2 users not shown)
Line 12:
===Path Types===
 
In [[RCT1]] and [[RCT2]], paths can be constructed using the path builder window, in the center of the topbar. There are 2 kinds of paths: [[Queue Lines]] and normal paths.
 
Queue lines are built from ride entrances and allow people to queue for rides. In the [[RCT1|original RCT]], all queue lines were blue. [[Corkscrew Follies/Added Attractions|Corkscrew Follies]] allows the building of green, red and yellow queue lines. When a queue line connects to an entrance and a normal path, a banner displaying either "closed" or the ride name will appear at the head of the queue line.
 
Normal paths allow normal movement, but Queue Lines can also function as general paths if they don't lead to a ride entrance. In RCT1, there were 5 different kinds of path design. The selection was expanded in Corkscrew Follies and further in [[Loopy Landscapes]].
 
Queue lines won't connect to adjacent queue lines, thus they never form intersections. In contrast, they will always connect to an adjacent normal path. Once a queue line connects to a path, you can no longer extend it.
 
Normal paths always connect to other adjacent normal paths. In RCT2 and RCT1, the creation of 2 paths side by side will form a wider continually intersecting path; many guests in RCT1 become stuck as they wander in circles around the paths. In RCT3, large intersecting paths no longer caused guests to be stuck.
 
===Path building options===
Paths can be built in 2 ways in RCT1 and 2. A first, direct method allows you to place path square by square, but only on flat and sloped terrain tile (not diagonal slopes or edges). Path tiles automatically connect to adjacent path tiles, forming continuous paths. Sloped paths only connect to paths on the top or bottom edges, 2 sloped paths running side by side never connect. Ground paths cost $10 in the original RCT, queue lines $12, but both were revised to $12 in Loopy Landscapes. YouPaths canare delete pathsdeleted by right-clicking on them. The refund is always $10 regardless of what the path originally cost. The player should be careful not to delete a path when it is above water and guests are walking on it, else they will fall and drown in the water.
 
You can also change the path style or type of existing paths that way. This applies even to underground or elevated paths. There are also different types of structures for support when building paths above ground and for tunnel entrances when underground. Replacing a path with a different type/style costs $6.
 
The second method allows you to select the head tile, i.e. where you start building the path, and allows you to add paths linearilly section by section. You specify the direction using the arrow buttons.
Line 34:
 
===Pathing Systems===
Guests getting lost can be a huge problem in RCT1 and RCT2, since their artificial intelligence is very limited. Most of the time, people wander around aimlessly, but it can happen that they have a specific destination: the park exit, a ride, a food/drink stall or a bathroom.
 
As guests can't turn around in the middle of a path, they need a special point for that: intersections, including ride exits, shops and stalls or benches (if they sit down). On every such decision point, they will choose the direction which is closer to their target, although, they will head straight to it and don't recognise dead ends. This can lead to your guests getting trapped. If they head for a ride, they will sooner or later give up, but if they want to leave the park, it can happen that they are trapped endlessly [[Guest Moods|getting angry]]. This causes your [[Park Rating|park rating]] to drop rapidly, same as if you block the park exit. Therefore, dead ends facing the exit have to be avoided. Remember that guests can decide to leave your park on every single tile.[[File:Pathing.png|thumb|300px|The red marked paths can lead to death traps!]] Also, long or ways with too many intersections to their destination can cause guests to lose happiness or get lost. A path can be as complicated as you want, and, as long as there are no decision points, your guests can't get lost. This is the reason why it is recommended to block ride exits with one-way signs if they are causing problems.
 
Many scenarios start with a suboptimal path system which can lead the player into continuing it that way - but often enough, it's a wise choice to remove it and start over. Paths leading to areas devoid of attractions and stalls should be removed or blocked off, because guests walking on them will get tired. Make use of do not enter signs. If a peep doesn't need to go down an exit path, they shouldn't go down it.
 
<p class="_1qeIAgB0cPwnLhDF9XSiJM">In RCT3, paths need more attention than in previous games. Peeps get confused when paths are bigger than 2 blocks wide! So, keep to two or less. Try to keep a central design. One big path that loops around or two smaller paths that branch out. Make exits longer than you need for [[roller coaster]]s, that way peeps don't bunch up areas near the exit. Avoid one block wide paths in major intersections. Avoid stairs unless for the excitement bonus as they clog up parks.</p>
===Important Tips===
* The user should be careful not to delete a path when it is above water and guests are walking on it, else they will fall and drown in the water.
 
==List of Paths==
Line 63 ⟶ 62:
*Yellow (since [[Added Attractions]])
===RollerCoaster Tycoon 2===
{{FootpathboxFootpathbox2D|Ash Footpath RCT2}}
{{FootpathboxFootpathbox2D|Brown Tarmac Footpath RCT2}}
{{FootpathboxFootpathbox2D|Crazy Paving Footpath RCT2}}
{{FootpathboxFootpathbox2D|Dirt Footpath RCT2}}
{{FootpathboxFootpathbox2D|Green Tarmac Footpath RCT2}}
{{FootpathboxFootpathbox2D|Road RCT2}}
{{FootpathboxFootpathbox2D|Space Style Footpath RCT2}}
{{FootpathboxFootpathbox2D|Tarmac Footpath RCT2}}
<br clear="all" />
====Time Twister====
{{FootpathboxFootpathbox2D|Circuit Footpath RCT2}}
{{FootpathboxFootpathbox2D|Mosaic Footpath RCT2}}
{{FootpathboxFootpathbox2D|Rainbow Footpath RCT2}}
{{FootpathboxFootpathbox2D|Rocky Footpath RCT2}}
{{FootpathboxFootpathbox2D|Sidewalk Footpath RCT2}}
{{FootpathboxFootpathbox2D|Sky Walk Footpath RCT2}}
{{FootpathboxFootpathbox2D|Wooden Footpath RCT2}}
<br clear="all" />
 
===RollerCoaster Tycoon 3===
====Normal Path====
*[[Under-Water Tunnel Path|Under-Water Tunnel]]
*[[Sandy Path|Sandy]]
*[[Tarmac Path|Tarmac]]
*[[Steel Path|Steel]]
*[[Ornate Path|Ornate]]
*[[Marble Path|Marble]]
*[[Leaf Path|Leaf]]
*[[Dirt-Track Path|Dirt-Track]]
*[[Crazy-paved Path]]
*[[Asphalt Path|Asphalt]]
====[[Queue Lines]]====
*[[Spooky Queue Line Path|Spooky]]
*[[Sci-Fi Queue Line Path|Sci-Fi]]
*[[Adventure Queue Line Path|Adventure]]
*[[Western Queue Line Path|Western]]
*[[Generic Queue Line Path|Generic]]
 
==Trivia and Tips==