Flying Roller Coaster
Construction
Track has a square-section steel spine, connected to the inside edges of tubular steel running rails. Supports are large tubular steel posts. Trains are held on the track by wheels below and inside the running rails. Unlike Lay-down Roller Coaster, this ride starts with upside-down station, has fewer compatible inversions but gives more excitement and is easier to design.
Special Track Elements
- Banked Curves
- Banked Helix
- Banked Swoop Track
- Half Loop
- Half In-Line Twist
Constraints
- Maximum track slope - 50°
- Maximum Track Slope - 60°
- Maximum Lift Hill Slope - 25°
- Maximum height above ground - 145 feet
Vehicles
Roller Coaster Tycoon 2
- Flying Roller Coaster Train
- Condor Train
- Petrodactyl Train
Roller Coaster Tycoon 3
Pre-built designs
Roller Coaster Tycoon 2
Build Menu
- Updraft
- Terror-dactyl
Scenarios
- Petrodactyl Terror (Jurassic Safari)
Roller Coaster Tycoon 3
Other Information
- Like Inverted Roller Coaster, Flying Roller Coaster gives very high Nausea due to negative vertical G's at ground slopes so prepare for a lot of throw-up by placing benches and litters and keeping food & drink at distance.
- Unlike Lay-down Roller Coaster, this gives pretty high Excitement and easier to build. Because of very few compatible inversions, the designs usually have not more than 9 Intensity Rating except that designs are like to throw riders from twisted slopes.
In Real Life
- Inverted Flying Roller Coaster is designed by B&M and the well-known is Superman: The Ultimate Flight.
Gallery
-
-
A custom designed Flying Roller Coaster