Paths: Difference between revisions

No change in size ,  12 years ago
(File added via photo placeholder)
Line 29:
The second method allows you to select the head tile , i.e where you start building the path, and allows you to add paths linearlly section by section. You specify the direction using the arrow buttons.
 
In this method, you can add elevated paths by selecting the slope up/down options. Elevated paths cost than normal paths, depending on the height. Supports can be customised in Loopy Landscapes, up to 5 options are available. Paths have a maximum support height of 4020 in RCT1, trying to create paths any higher off the ground will cause an error message saying "Can't build footpath here, too high for supports". Paths can be build over tracks and other paths; a clearance of 2 height marks is needed for guests to pass through.
 
By building into a cliff, underground paths or tunnels can be created. Underground paths always cost $32 in RCT1, regardless of depth. Underground paths must clear other rides/paths by 2 height marks underneath.
Anonymous user