Megaworld Park/Scenario Guide: Difference between revisions

no edit summary
No edit summary
No edit summary
 
(One intermediate revision by the same user not shown)
Line 11:
As with Viper, you may edit Purple Peril by removing some inversions. This will decrease its nausea rating, although the rating will remain high; be sure to put a handyman on patrol and some benches on the exit path.
 
Like Purple Peril, Spinner has a high nausea rating and a risk of brakes failure crashes. You will need to remove the ride or edit it considerably. ​You can make it less nauseating by replacing the spinning cars with non-spinning ones, although you would render its name meaningless and reduce its excitement rating in doing so. Failing that, demolish the ride and build a new coaster in its place.
 
Batflyer is prone to stalling at the bases of its lift hills in the event of [[Ride breakdowns|safety cut-out]] breakdowns. You may reduce the ride's vehicle count and increase its minimum wait time to prevent vehicles from piling up, or you may run the vehicles as 2 car trains. Either strategy will work. You may also rework its layout or demolish it.
Line 26:
*Increase the number of vehicles on Raging Rapids, the log flume, the car rides, and the transport rides. Replace the train on the Monorail Shuttle with one of a different type or lengthen it to 6 cars.
*Consider demolishing Viper and Purple Peril. If you decide to keep them, remove at least two inversions from each and add block brakes. You must get their intensity ratings below 10. Extend the queue path for Purple Peril so that at least the equivalent of one full train (28 passengers; less if you use shorter trains) can queue for the ride at any time.
*Edit Cyclone, Vampire, Thunderlooper, Big Bug, and Runaway Mine Train to include block brakes. You can also demolish and replace the rides, but adding block brakes to the existing rides will save you time.
*Make Skidder (equivalent of Spinner in RCT1) safe by replacing its final track piece before the station with a block brake. Switch the operating mode from block sectioned mode back to continuous circuit mode, switch the desired load from "any" to "full", reduce the minimum wait time, and consider relocating the entrance to the front of the station to facilitate loading. This tip applies to RCT2's version only, as RCT Classic has a Spinning Wild Mouse in place.
[[Category:Scenario Guide]]
Anonymous user