Dinghy Slide: Difference between revisions

no edit summary
No edit summary
Line 28:
*Ice Flow
===Other Information===
*This ride is called Water Slide in  [[RCT1]].
*[[File:Dinghyreadme.png|thumb|400px|A message in the RCT2 manual saying that the dinghy slide does not include water.]]A good waterdinghy slide requires at least one steep drop, but can be extended into a complex layout, so long as care is taken on the crests of hills, as dinghies can crash off the track.
*A remedy for the problem is to build a completely circular section of track at the crests of hills and in the turns, which prevent the dinghies from leaving the track. Also by covering the track instead of the roofless track, it can prevent dinghies crashing, although it will lower the excitement. In RCT1, covered track sections also cost $1 more than uncovered ones.
*Place covered sections where boats experience negative gs. Any section experiencing a negative g of above 1.0g will cause the boat to fly off the track. Potential trouble spots include
Line 39 ⟶ 40:
*Note that the dinghies are heavier when carrying guests, so the test mode can be deceptive.
*N.B lift hills are never covered. So place your lift hills only at the very top of a hill, i.e when you are sure the boats aren't going fast enough to crash, but not so high up such that dinghies can't climb to the lift hill.
*WaterDinghy slides have considerable friction, so dingies are notorious for stopping in the middle of a level section and causing a traffic jam as the boats pile up behind the stalled boats. This most often happens after a safety cut out, when the lift hill stops working. When that happens, doubleclick "close" on the traffic lights to clear the track, then reopen it.
*In the [[RCT2]] readme, a message says that the waterdinghy slide does not include water, even though it is located under [[Ride Types|water rides]].
*This ride is called Water Slide in [[RCT1]].
*In the [[RCT2]] readme, a message says that the water slide does not include water, even though it is located under [[Ride Types|water rides]].
*To prevent this ride from stalling out, you should have only 1 lift hill (right out of the station). Make sure that the boat can make the course, WITHOUT creating another lift.
*Another way to prevent the boats from stalling is to have a drop immediately after every lift hill, even if it is a very short one. The drop will space the boats out slightly and they will continue going normally, so you will never have to close and reopen the ride. If you must, however, make sure to pause the game before closing the ride to avoid the guests leaving the queue line.
*If you are not good at creating a waterdinghy slide, you can simply use the Demon Drop (ride name) in RCT 1 and 2.
*Remember, with a bit of practice in building them, waterdinghy slides can be popular rides!
 
===Name===
The ride was called "Water Slide" in [[RCT1]].
==[[The Amazing Earl|Amazing Earl's]] Water Slide==
[[File:AE-WSLID.jpg|thumb|286px|Amazing Earl's Water Slide.]]The Amazing Earl/Dan Wolfe created a downloadable Water Slide where the guests put on their swimsuits and slide down the slippery slopes. Instead of dinghies, the guests slide down the ride on their stomaches. However, this ride works just like the original dinghy slide, except that you can't see the inflatable boats. [[File:AE-WSLID-3D.gif|frame|A close up of what the guests look like riding the Water Slide.]]
0

edits