Anonymous user
Dinghy Slide: Difference between revisions
→Other Information
Line 29:
#Transitions from steep (60o) to gentle (20o) slopes when going upwards.
#Start of downwards slopes. When the slope transitions from level to gentle slopes, dingies will crash if travelling at a high enough speed.
*If entering a downward slope with too much side friction (directly after a turn), the boats will leave the track as well unless covered.
N.B lift hills are never covered. So place yor lift hills only at the very top of a hill, i.e when you are sure the boats arent going fast enough to crash, but not so high up such that dinghies can't climb to the lift hill.▼
*Note that the dinghies are heavier when carrying guests, so the test mode can be deceptive.
▲*N.B lift hills are never covered. So place
*Water slides have considerable friction, so dingies are notorious for stopping in the middle of a level section and causing a traffic jam as the boats pile up behind the stalled boats. This most often happens after a safety cut out, when the lift hill stops working. When that happens, doubleclick "close" on the traffic lights to clear the track, then reopen it.
*This ride is called Dinghy Slide in [[RCT2]] and Dingy Slide in [[RCT3]]
*In the [[RCT2]] readme, a message says that the water slide does not include water, even though it is located under [[Ride Types|water rides]].
*To prevent this ride from stalling out, you should have only 1 lift hill (right out of the station). Make sure that the boat can make the course, WITHOUT creating another lift.
*If you are not good at creating a water slide, you can used the Demon Drop (ride name) in RCT 1 and 2.
*Still remember: with a bit of practice in building them, water slides can be popular rides!
==[[The Amazing Earl|Amazing Earl's]] Water Slide==
| |||