Crash: Difference between revisions

2,718 bytes added ,  8 years ago
Re-wrote much of this poorly-written but otherwise informative article. Re-writing of the Prevention section and addition of all metric units is still pending.
mNo edit summary
(Re-wrote much of this poorly-written but otherwise informative article. Re-writing of the Prevention section and addition of all metric units is still pending.)
Line 1:
{{underconst.}}
[[File:193875-rollercoaster-tycoon-2-windows-screenshot-a-rollercoaster.png|thumb|A crash in Roller Coaster Tycoon 2]]A '''crash''' in the [[RollerCoaster Tycoon series]] is an event that may happen as a result of ride malfunction or poor ride design in [[RollerCoaster Tycoon]] and [[RollerCoaster Tycoon 2]]. Crashes result in the destruction of at least one ride train, and death of any [[Guests & Staff|guests]] who were on the train. In [[RollerCoaster Tycoon 3]], peeps cannot die under any circumstances, and so crashes are less of a problem, though they can still occur.
[[File:193875-rollercoaster-tycoon-2-windows-screenshot-a-rollercoaster.png|thumb|A crash in [[RollerCoaster Tycoon 2]]]]
A '''crash''' is an event where at least one car of a ride explodes. Crashes may occur when a car leaves the boundaries of its ride, such as its running rails or tower, and explodes upon (in RCT1 and RCT2) or after (in RCT3) impact with any surface that is not part of the ride (usually the terrain or water), or if it hits another car at a high enough speed.
 
==Probability==
Some ride types are more susceptible to crashes than other rides. For instance, all flat rides, like the [[Merry-Go-Round]] and [[Top Spin]], are immune to crashes as they have predefined ride sizes that cannot be modified by the player in any way except with regards to their placement and operating modes that do not give any provisions for a crash, while tracked rides like the [[Car Ride]], [[Maze]] and [[Mini Golf]] are ''technically'' immune to crashes as their cars never travel at a fast enough speed to crash and the ride type in general does not have any operating modes that permit the possibility of a crash occurring. On the other hand, most other tracked rides, such as [[Go-Karts]], [[Launched Freefall]], [[roller coaster]]s in general and water rides like the [[Dinghy Slide]], [[River Rapids]] and [[Log Flume]] have an inherent possibility of crashing, although they can also be made technically crash-proof with careful design and planning as well as a proper maintenance regime.
 
==Causes==
As in most real-life scenarios, crashes are usually caused by a number of factors. In RollerCoaster Tycoon, these factors include the ride's operating mode, the design of the ride, the speed of the ride's car at the point of impact and the ride breaking down.
The type of ride most prone to crashes is the roller coaster, though several other types of rides can crash. The most common cause of crashes is the "[[Ride breakdowns#(Station) Brakes Failure|station brakes failure" breakdown]] on roller coasters. On roller coasters with multiple trains, this causes a crash when one train is still in the station and another train comes in at full speed. Due to the station brakes failing to slow the train, it collides with the back of the stationary train. On roller coasters with single-car trains, such as [[Single-Rail Roller Coaster]] and [[Wild Mouse]] variants, this is not as much of a problem.
 
===Operating Mode===
Poorly-designed roller coasters can be subject to crashes, even if the ride is not broken down or if a ride has not experienced a Station Brakes Failure breakdown. Often, these rides will not pass their initial ride testing and will not be opened to the public. However, sometimes a ride mid-design can cause ride crashes under certain circumstances. For example, the roller coaster [[Dynamite Dunes#Pre-Built Rides|Dynamite Blaster]] in [[Dynamite Dunes]] has a lengthy ride section after the train leaves the station but prior to it reaching the lift hill. If a train entering onto the lift hill is stopped due to a [[Ride breakdowns#Safety Cut-out|safety cut-out]] breakdown, there is a remote possibility that another train that has exited the station may collide with it. This example, like many others, can be prevented by increasing the minimum wait time at the station, or by reducing or eliminating space between the station and lift hill.[[File:DeathSlide-Crashed.gif|thumb|240px|A crashed water slide in Fiasco Forest.]]
While this is rarely the primary cause of a crash, a ride's operating mode may indirectly cause a crash, especially if said crash is caused by other factors and if it is the ''only'' reason the ride can ever crash. For instance, the Shuttle Loop design for the [[Looping Coaster]] in RCT1 can crash if its operating mode is changed from "Powered-Launch Mode" to "Reverse-incline Launched Shuttle Mode" (which would cause the train of cars to reverse out of the station and off the track), or if its Launch Speed is increased beyond the value that is set when it is built (which may cause the train to overshoot the end of the track). Without making any changes to its operating mode, however, the Shuttle Loop design is technically crash-proof as it only runs 1 train and would never leave the boundaries of its track under any other circumstances. As another example, pre-installed [[Launched Freefall]] designs are technically crash-proof unless the player deliberately increases the ride's Launch Speed beyond the value that is set when the ride was first built, which would cause the car to overshoot the top piece and crash.
 
===Ride Design===
Certain roller coasters types can crash in different ways; the [[Bobsled Roller Coaster]], [[Reverser Roller Coaster]], [[Flying Turns]] and [[Wooden Side-Friction Roller Coaster]] can crash as a result of cresting hills too quickly. As the trains/cars on these roller coasters are not attached to the track, they can fly free when going over hills. Sometimes they may pass tests, but after opening, the added weight of guests will cause it to move faster and may crash. [[Water Slide]]s can crash in a similar way, though these crashes are preventable by using closed track at the crests of high-speed hills. The [[Ghost Train]] and [[Haunted Mansion Ride]] will crash if they travel round a curve too fast.
[[File:DeathSlide-Crashed.gif|thumb|The aptly-named Death Slide in Fiasco Forest, an example of a crash caused by ride design]]
Sometimes, a ride may be designed in such a manner that a crash may occur while its cars are travelling around the track. For ride types where their cars are not held in place by the ride's running rails, such as the [[Bobsleigh Coaster]], [[Ghost Train]] and Ring/Raft Slide, the ride can crash if a car flies off the track. This usually happens when the car is travelling at a high enough speed while turning a corner or upon reaching the crest of a hill.
 
It is also worth noting that the number of riders will affect the speed of the car as it travels around the track. In general, a car with more riders will travel faster than a car with no riders. Therefore, it is possible for a track design to safely pass test runs without crashing (as test runs are done without any riders on the car), only for it to crash once it opens since the additional speed caused by having riders gives the car just enough speed for it to crash. One example of such a ride is Death Slide in [[Fiasco Forest]], which crashes at the start of the scenario despite having completed a test run—this is evident from it already having complete ride ratings when the player first loads the scenario.
This is a certain condition that keep in mind building these rides may have to think about speed on peaks of next crests.
* Bobsled Roller Coaster - 30 mph at highest speed.
* Flying Turns - 28 mph at highest speed
* Reverser Roller Coaster - 30 mph at highest speed
* Wooden Side-Friction Roller Coaster - 25 mph at highest speed
* Water Slides - 30 mph at highest speed
* Ghost Train or variant - 30 mph at high speed
Another ways to design may regard of curves. Only Ghost Train or variant occurs.
* 15 mph for small curve
* 19 mph for large curve
Other rides that may crash include the [[Whoa Belly/Launched Freefall]]. The Whoa Belly can only crash when the launch speed is set too high and it leaves the vertical section, crashing when it hits the top of the tower. Roller coasters set to "powered launch mode", such as the Shuttle Loop, can crash similarly, if they fly off the track from a launch that is too fast.
 
In RCT1 and RCT2, excluding the Ghost Train and Haunted Mansion Ride, most rides featuring cars that are not held in place by the ride's running rails will crash if a car negotiates the crest of a hill at a speed exceeding 30 MPH (48 km/h) or the start of a drop at a speed exceeding 40 MPH. Of the reminder, the [[Flying Turns]] will crash if a car negotiates a hill at a speed exceeding 28 MPH or the start of a drop at a speed exceeding 30 MPH, while the [[Side-Friction Coaster]] will crash if a car negotiates a hill at a speed exceeding 25 MPH. A [[Ghost Train]] or Haunted Mansion Ride car will crash if it turns a sharp curve at a speed exceeding 15 MPH or a medium curve at a speed exceeding 19 MPH.
Universally, any tracked ride will crash if two trains collide with each other at a combined speed of 30MPH/48KPH or if they leave the track for any reason.
 
The [[Air Powered Coaster]] and [[Reverse Freefall Coaster]] and their variants, despite having cars that are held in place by the ride's running rails, can be constructed as incomplete circuits, so their cars can still crash if they travel at a high enough speed to overshoot the end of the track.
It is also possible for a [[Log Flume]] to crash, especially if a reverser segment is located shortly after a large drop.
 
Both the [[Dinghy Slide]] and [[Water Coaster]] rides are known for inexplicably crashing in RCT1 and RCT2 if a car travels down a drop with a height exceeding one steep drop.
In Roller Coaster Tycoon 2, besides Powered Launched Mode can fly off the track, these is another option to be possibly crashed. Normally when the train accelerates and attempts to return to the station, only [[Looping Roller Coaster]] must build backward part to prevent derailing ([[LIM-launched Roller Coaster]] or [[Corkscrew Roller Coaster]] don't need to build) but when the Brakes Failure occurs, the Looping designs will take benefit as the train cannot be stopped but still keeps in the track unlike LIM and Corkscrew that the train cannot be kept in the station and derailing. Meanwhile in first game, there is an universal glitch that Station Brakes Failure occurs in Powered Launched and the train try to derail from the station but it stops at the end for a while before launching again.
 
===Speed (on Impact)===
Remember, [[Reverse Freefall Coaster]] is impossible to have Station Brakes Failure so don't worry about derailing at the end of the station.
In RCT1 and RCT2, a crash can happen when the car of a ride is travelling too fast when it collides with another car on the same ride. Similar to a ride's operating mode, the speed of a car on impact may cause a crash due to other contributing causes, such as the ride's design or a [[breakdown]].
 
It is not possible for rides to crash in RCT3 due to this as cars only crash when they leave the ride boundaries.
 
Like crashes caused by ride design, the speed of a car is influenced and usually increased slightly by the presence of riders. However, unlike crashes caused by ride design, ''all'' rides that have an inherent possibility of crashing in RCT1 and RCT2 will crash if two cars on the ride collide at a ''combined'' speed of 30 MPH (48 km/h) or more.
 
===[[Breakdown]]===
It is important to note that a ride that exhibits other possible causes of crashing may actually operate normally without incident for many years as long as it does not experience specific breakdowns. Therefore, a ride breakdown is sometimes indirectly responsible for a ride crashing because it drastically increases the chances of the ride crashing through other causes. One of the most obvious examples comes from any ride design where the car enters the station exceeding 30 MPH (48 km/h) while another car is at the station. Under normal operations, the car that enters the station will be slowed down safely by the station platform's brakes the moment it enters, and it would fetch up behind the other car in the station without incident. However, if the ride experiences a "Station Brakes Failure" or "Brakes Failure", the car will not slow down as it enters the station and will crash the moment it collides with the other car that is already in the station as it is travelling at a speed exceeding 30 MPH at the time of impact.
 
==Effects==
The effects of a crash can be split into two categories: immediate effects and delayed effects.
 
===Immediate Effects===
The moment a crash occurs, the ride that crashed will be closed immediately without any player input and a message will appear in the message window stating that the ride has crashed. Because the ride is closed automatically, any guests queuing up for the ride will exit the queue.
 
In RCT1 and RCT2, there are a few additional effects: the ride window for the ride that crashed will pop up, with the main view automatically focusing on the car that crashed or is in the process of crashing, any riders on the ill-fated car are immediately removed from the park, and a second message that follows after the initial message stating that the ride has crashed will tally this number of riders as the number of guests that have been killed on the ride. There will also be an endless cloud of steam rising from the crash point.
 
===Delayed Effects===
Some of these delayed effects will occur almost directly after the immediate effects of the crash, while others will only be more pronounced in the long-run.
 
As word goes about that a ride in the park has crashed, the ill-fated ride will suffer a massive drop in popularity. This drop then extends to the entire park in general, with the park's [[Park Rating]] taking a massive hit and a significantly increased rate of guests leaving the park. Park attendance also falls as a result, with fewer guests entering the park.
 
The ill-fated ride can be "reset" by manually closing it twice in succession; in the process, the steam issuing from the crash point will disappear completely. The ride can then be re-opened normally. However, the drop in popularity will remain for a long time, and most guests visiting the park will refuse to ride the ride in the months following the crash. Eventually, some guests will begin riding the ride again, but the ride in question will never be able to reach the same level of popularity as it did before the crash. The only way to fully rectify the drop in popularity is to completely demolish the ride and rebuild it as a "new" ride.
 
==Prevention==
Line 39 ⟶ 60:
In RollerCoaster Tycoon 3, peeps cannot die under any circumstances, thus, crashes are less of a problem. Crashes can still occur if the train derails due to an incomplete circuit, in which case, the cars do not explode immediately after touching land or scenery; the cars simply explode 10 seconds after derailing. This means that derailed cars can slide across paths, knocking over peeps along the way (''see: [[Peep Bowling]]''). Also unlike the prequels, when two trains collide at high speeds, they simply bump off each other rather than exploding.
 
== Notes[[Category:Strategy Guides]] ==
==Aftermath==
After a ride crashes, a number of negative effects occur. The ride that crashed will suffer an extreme loss of popularity, as in the guests' eyes the ride "isn't safe." Nothing will change this reputation except for rebuilding the ride completely. This can be easily done for rides that stay above ground by simply saving the track design, demolishing the old ride, and placing a new one from the saved track design. The best option for rides that go underground is to either make an entirely new design, or rebuild same design piece-by-piece while demolishing the old ride piece-by-piece.
 
If the same ride is kept, eventually guests will start riding it again, but it will be a slow recovery and the ride will almost never reach the same popularity that it had before. You could also close the ride for months, after a ride crash, then reopen when the reliability is back to a reasonable area. Other effects of ride crashes include a loss of popularity for the park, and a drop in [[Park Rating|park rating]]. These losses will quickly recover if the ride is closed, edited, and tested. To reset a crashed ride, doubleclick the red button on the traffic lights/flag, then it can be used again. 
 
== Notes[[Category:Strategy Guides]] ==
In [[RollerCoaster Tycoon]] and [[RollerCoaster Tycoon 2|2]] when the cars/train make contact with the ground, the ride vehicle will immediately explode. However, in [[RollerCoaster Tycoon 3|RCT3]], when this happens, the vehicle won't explode until about 5-10 seconds of making contact with the ground. Also guests cannot die from this in the third game while they can in the first two.
[[Category:Descriptions]]